Electronic Kits & Modules
-
A Board of 8 Twin Coil Latching Relays with 3 Amp SPCO Contact
Excl. Tax:
£31.39
Incl. Tax:
£37.67
-
A simple way of switching multple points from one switch
-
These modules can be used to convert AC to DC. The most common AC supply voltages are 5, 12v, 15v, 16v, 18v and 24v, these modules will handle all these voltages, and convert them into DC.
Excl. Tax:
£4.56
Incl. Tax:
£5.47
-
These modules can be used to convert AC to DC. The most common AC supply voltages are 5, 12v, 15v, 16v, 18v and 24v, these modules will handle all these voltages, and convert them into DC.
Excl. Tax:
£4.72
Incl. Tax:
£5.66
-
The Kit consists of 10 Red LED's, 10 Green LED's, 10 1K Resistors, and 20 Panel mounting Bezels.
Excl. Tax:
£3.83
Incl. Tax:
£4.60
-
The Kit consists of 10 Red LED's, 10 Green LED's, 10 1K Resistors.
Excl. Tax:
£4.42
Incl. Tax:
£5.30
-
This type of indication is used to indicate the position or movement of the train in hidden areas of your layout, such as tunnels and underground areas, or parts of the layout you just cannot see from the control area.
Excl. Tax:
£2.99
Incl. Tax:
£3.59
-
The Kit consists of 10 Red LED's, 10 Green LED's, 10 1K Resistors, and 20 Panel mounting Bezels.
Excl. Tax:
£3.10
Incl. Tax:
£3.72
-
This Kit is designed to indicate the state of a set of Points
Excl. Tax:
£5.40
Incl. Tax:
£6.48
-
simple circuit that can indicate the last action taken on a Momentary Switch
Excl. Tax:
£4.83
Incl. Tax:
£5.80
-
The Standard unit will power up to 4 sets of points simultaneously.
Excl. Tax:
£5.95
Incl. Tax:
£7.14
-
In this application the MR204 is used as a Automatic Forward / Reverse (Shuttle) Control.
Excl. Tax:
£10.48
Incl. Tax:
£12.58
-
In this project we show how to Isolate sections of track to avoid collisions at a simple crossover.
-
A miniature relay board with 2 changeover 2 Amp contacts,terminals for the Input & Output.
Excl. Tax:
£4.57
Incl. Tax:
£5.48
-
A miniature relay board with 2 changeover 2 Amp contacts,terminals for the Input & Output.
Excl. Tax:
£4.57
Incl. Tax:
£5.48
-
A 18way Screw terminal Block which can be snapped down to a 3, 6, 9, 12way section
Excl. Tax:
£3.68
Incl. Tax:
£4.42
-
A 3way Screw terminal Block which is one sixth of the MR230
-
The Model Rail Power Bus bar Kit includes a 10m length of Black 32/0.2mm cable, 10 cable tidy clips, & 10 quick connect clips.The cable is capable of carrying 10 Amps
-
The Model Rail Power Bus bar Kit includes a 10m length of Red 32/0.2mm cable, 10 cable tidy clips, & 10 quick connect clips.The cable is capable of carrying 10 Amps
-
A three position ON-ON-ON switch with a variety of applications where 3 circuits need to be controlled by one switch
Excl. Tax:
£3.76
Incl. Tax:
£4.51
-
A Point Motor Switch for Tortoise Motors and Stall Motors.
Excl. Tax:
£5.85
Incl. Tax:
£7.02
-
A Points Motor Switch with Status Indication for Coil type Motors - with no extra wiring , switches, or sensors.
Excl. Tax:
£6.77
Incl. Tax:
£8.12
-
When the timer is triggered by SW2 it will remain ON for a predetermined period set by the preset VR1. The preset varies the time ON from approx 1 sec to 120 seconds.
Excl. Tax:
£5.89
Incl. Tax:
£7.07
-
When the timer is triggered by SW2 it will remain ON for a predetermined period set by the preset VR1. The preset varies the time ON from approx 1 sec to 120 seconds.
Excl. Tax:
£4.48
Incl. Tax:
£5.38