We now supply just one 3 way unit as many of you have said that 6 is too many, so here we arejust the one. Ideal for a 3 way set of Points or signal or any equipment that just has 3 short wires comming from it.
As you are aware all proprietary manufactures supply their products with short lengths of wire which are then connected to your cables. This is either done by using a terminal block or soldering the wires to your cable.
Each 3 way section has 3 IN screw terminals, and 3 OUT terminals. The terminals and the board are rated at 10 Amps, so will take wires from lighting circuits that draw very little current to points via a CDU which draw large amounts of current.
There are 4 fixing holes for each 3 way section, or you can us the self adhesive backing.
We also do this in a 6 way strip with Part No MR230